Contact/Questions?
1-888-844-3549

SafetySkills Online Safety Training

Hand and Power Tool Safety - Cal/OSHA Thumbnail
For Multiple Users
Tools are such a common part of our lives that it’s difficult to remember that they may pose potential hazards to our safety. This course will teach employees the importance of hand and power tool safety and how to achieve it. Employees who successfully complete this course should learn the common hazards of different types of hand and power tools, including electrical, pneumatic, hydraulic and abrasive-wheel tools and how to minimize or eliminate those hazards. This course is intended for California employees who, as part of their regular work duties, are required to use or work around hand and power tools. This course is provided to assist the employer in meeting the requirements of Cal/OSHA Standard 8 CCR Section 3556 and OSHA Standards 29 CFR 1910.241–244. While this course addresses OSHA and Cal/OSHA training requirements, there may be a site-specific training component required that must be fulfilled by an employer.
CEU 0.1
Duration 00:24:00
Relevant Standards 8 CCR Sec. 3556, 29 CFR 1910.241-244
Difficulty 1
Interactivity 2
Prerequisites None
Competencies
HPT-1.1.0 - Introduction and objectives
HPT-1.10.0 - Identify the three main causes of injury from hand and power tools and methods of injury prevention
HPT-1.2.0 - Identify the employer and employee responsibilities for safe use
HPT-1.3.0 - Identify common hand tools and their safe work practices
HPT-1.4.0 - Identify and discuss common power tools and their safe work practices
HPT-1.5.0 - Identify electric tool hazards and describe their safe work practices and inspection procedures
HPT-1.6.0 - Identify power abrasive wheel tool hazards and describe their safe work practices and inspection procedures
HPT-1.7.0 - Identify pneumatic tool hazards and describe their safe work practices and inspection procedures
HPT-1.8.0 - Identify power-actuated tool hazards and describe their safe work practices and inspection procedures
HPT-1.9.0 - Identify hydraulic power tool hazards and describe their safe work practices and inspection procedures

Other Courses You Might Like

Process Safety Management Thumbnail

Process Safety Management

12 and 15-Passenger Van Drivers and Administrators Thumbnail

12 and 15-Passenger Van Drivers and Administrators

Active Shooter (A.L.I.C.E.) Thumbnail

Active Shooter (A.L.I.C.E.)

Mold and Mildew Awareness Thumbnail

Mold and Mildew Awareness

Data Protection for Industry and Business Thumbnail

Data Protection for Industry and Business

Fatigue Management for Control Room Employees Thumbnail

Fatigue Management for Control Room Employees

Used Oil Management Thumbnail

Used Oil Management

Universal Waste Management Thumbnail

Universal Waste Management

Radiation Safety Awareness Thumbnail

Radiation Safety Awareness

Situational Awareness-Business Travel Thumbnail

Situational Awareness-Business Travel

Storm Water Pollution Prevention for Industrial Operations Thumbnail

Storm Water Pollution Prevention for Industrial Operations

Severe Weather and Outdoor Work Thumbnail

Severe Weather and Outdoor Work

Stop Work Authority Thumbnail

Stop Work Authority

Disease Prevention for the Tattoo Industry Thumbnail

Disease Prevention for the Tattoo Industry

Pollution Prevention Initiatives Thumbnail

Pollution Prevention Initiatives

An Engaging Experience

SafetySkills online safety training courseware encompasses rich media animations, studio produced audio, dynamic Flash and 3D simulations designed not only to convey the subject matter, but to engage the learner.

Your learners won’t be able to go brain-dead, simply toggling through slides; rather they are continuously challenged throughout the course to solve puzzles, answer questions and interact with the training.

Because Online Safety Training is NOT a Spectator Sport

Comprehensive Catalog

Online Safety Training

The SafetySkills training library consists of 350+ environmental, occupational health and safety (EHS) and human resources (HR) compliance titles targeted toward multiple industries.

We believe that training is more effective when the learner can identify and relate to the situations, subjects and environments specific to their own industry. SafetySkills online safety training courseware includes EHS and HR series focused on specific industries, including:

  • Powerfully Easy Training Management

    Our cloud-based LMS helps you assign, track and report on all of your organization's safety training activities.

  • Always Current, Always Compliant

    We are the support team. We stand behind our products with best-in-class, in-house technical and customer support.

  • Accurate and Effective Online Safety Training

    Over 10,000 companies choose SafetySkills to help meet their environmental and occupational health and safety training requirments.